Cartridge heater 6*15MM 24V 60W

The heater head size: 6x15mm

Wire length: 1 meter

Voltage: 24V

Watt: 60W

The improvement compared to ordinary red heater

1. From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.

2. Therefore, from the original 40W power increased to 60W, the maximum temperature increased from 300℃ to 450℃ or so. Get faster heating speed.

3. The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.

4. Support the customization of different specifications, length, resistance of the heater.

5. Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).

6.The heating tube is marked with voltage and power to make it easier for customers to use.

Notice:

1. The effective heating part of the heater must keep dry.

2. The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded.

3. Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases.

4. Electric components should be stored in a dry place.

1Compatible

V6 Hotend

Dragon Hotend

1Package

1x Cartridge Heater 6x15mm